USED Rode VideoMic Pro+
Free delivery also available - more info
Excellent - Very little signs of use, with no more than a few cosmetic marks
This Mic will show very light use and will exhibit only a few light marks such as light wear to the outer casing.
Shutter Count (approximately): Not available
Included: 3.5mm TRS Cable, LB-1 Lithium-Ion Rechargeable Battery, White Box
Not included: Original Box, Micro-USB Cable, Manual More
Thinking of upgrading? Trade in today
Finance options available
This Mic will show very light use and will exhibit only a few light marks such as light wear to the outer casing.
Shutter Count (approximately): Not available
Included: 3.5mm TRS Cable, LB-1 Lithium-Ion Rechargeable Battery, White Box
Not included: Original Box, Micro-USB Cable, Manual
The RODE VideoMic Pro+ sits at the top of RODE's line of DSLR style on-camera shotgun microphones. The VideoMic Pro+ comes with new features such as a switchable highpass filter, a safety channel, for recording in difficult environments, and a new intelligent on/off system, which turns the microphone on and off based on the power coming from your camera.
Key Features: RODE VideoMic Pro+
- The next step in RODE's VideoMic on camera microphone line: The VideoMic Pro+ builds on the successes of the rest of the VideoMic line
- Automatic power function: When plug-in power is available, the microphone will turn on and off with the camera, ensuring battery isn't unnecessarily wasted by leaving the microphone turned on
- Digital switching: New features including a 2-stage high pass filter, 3-stage gain control, high frequency boost, and a safety channel can all be combined to provide the best results in any given situation
- Multiple power options: The VideoMic Pro+ can be powered by AA batteries, the included RODE LB-1 Li-Ion rechargeable battery, or via continuous Micro USB power
- Upgraded battery door: RODE have listened to their community and have redesigned the battery compartment on their newest microphone
Specifications:
- Acoustic principle: Line Gradient
- Active electronics: JFET impedance converter
- Capsule: 0.55"
- Address type: End
- Frequency range: 20Hz - 20kHz
- Output impendance: 200?
- Maximum SPL: 133dB SPL
- Maximum output level: 7.7dBu (@ 1kHz, 1% THD into 1K? load)
- Sensitivity: 033.6dB re 1 Volt/Pascal (21.20mV @ 94 dB SPL) +/- 2dB @ 1kHz
- Equivalent noise level (A-weighted): 14dBA
- Power options: Continuous power via Micro USB, 2 x AA batteries, rechargeable battery (RODE LB-1)
- Polar pattern: Supercardioid
- Weight: 122g
- Dimensions: 111 x 66 x 170mm
- Output: 3.5mm jack
Product Specification
For Use With | Any Camcorder or Camera with Microphone Input and HotShoe mount |
Microphone Connector | 3.5mm Jack |
Pick-up pattern | Cardioid |
Size | 111mm x 66mm x 170mm |
Type | On-Camera |
Weight [g] | 122.00 |
Wireless | No |